stay & Feel -3-fall-winter-08-2009

     
   
  • Decolorize the entire head with Decolor B diamond (staying off the scalp) and
  • tone with Framcolor ADD candy floss + clear
  • OR ---  Framcolor Eclectic OE + 9PE.
   
1.
  • Isolate a triangle on the top of the head
  • from the end of each eyebrow
  • see picture 3a
  • to the vertex. (highest point on the head)
2.
  • Isolate the remaining perimeter by sectioning
  • from each eyebrow
  • see picture 3a
  • to 2 cm (3/4") above each ear
  • and below the occipital.
3a 3b
  • Comb the perimeter down and cut
  • from the cheekbones (zygomatic bone)
  • to the earlobes
  • to the corner of the nape and
  • ending 2cm (3/4") below the nape

look how this design line is almost the same as the one used in this haircut see step# 4 (rounded perimeter in back from ear lobe to ear lobe)

.3b
4.
  • Comb the top section down in it's
  • natural fall and
  • cut 3 cm (1 1/4") longer than the perimeter.

look how this OVERLAY line is almost the same as the one used in this haircut see step# 4 (rounded perimeter in back from ear lobe to ear lobe)

(reference points: earlobe - cheek bone - "to mid nose" changes to end of nose in the dis-connected stack section)

5.
  • Create a center guide on the top at the
    vertex.
  • Cut this guide to 17 cm (6 3/4") in length.
  • Cut the top square to this guide
  •  
  • here they are "flat topping" to get the layering stack on the ends
6.
  • Direct the front triangle down forward and cut to the eyes.
  • Lighten the top of the head with thinning shears.